STM8

schematics for discovery board
The stm8 discovery board can be programmed using the Arduino IDE after board preferences have been modified.

http://arduino.esp8266.com/stable/package_esp8266com_index.json
https://sandeepmistry.github.io/arduino-nRF5/package_nRF5_boards_index.json
https://github.com/tenbaht/sduino/raw/master/package_sduino_stm8_index.json


1. youtube stm talk part one
2. youtube stm talk part two


sudo apt-get install libudev-dev libsystemd-dev


cc -g -O0 --std=gnu99 --pedantic `pkg-config --cflags libusb-1.0` stlink.o stlinkv2.o espstlink.o main.o byte_utils.o ihex.o srec.o stm8.o `pkg-config --libs libusb-1.0` -o stm8flash

Note, in above,

pkg-config --cflags libusb-1.0

produces

-I/usr/include/libusb-1.0

The following is the command that made stm8flash to work:

sudo apt-get install libusb-1.0


you tube out of box

This is a story about creating a demo board for working with shift registers.

1. first create the circuit board
2. demo on Arduino platform as a single, 8 bit shift register
3. expand demo board to use multiple SR, iterative with software development
4. when hardware is operational port the software to STM8 platform and Cypress board

Notes about creating the circuit board for the shift reg (demo)

Some revived projects:
rs232c
rfid
Some links that are embedded in the device, as seen by Windows file manager

A burst of energy and enthusiasm for my family of mcus led me to a busy day. I was searching for some info on an STM8s-discovery board and came across the live video feed of Russian Soyuz MS-09 spacecraft ISS resupply launch, which was great to watch.