reset

reset-the-micro-bit-to-factory-defaults
about the radio option on uBIT

Interesting pins on the Arduino

1. Attach a terminal or PC with terminal emulation to the console port of the router. Use the following terminal settings:
   9600 baud rate, No parity, 8 data bits, 1 stop bit, No flow control.
   The required console cable specifications are described in the Cabling Guide for RJ-45 Console and AUX Ports (Cisco's 1000 series, 2500 series, and AS5100).
2. If you still have access to the router,
3. type show version and